Sprinkler systems explained: A guide to sprinkler installation standards and rules
BRE is an independent, research-based consultancy, testing and training organisation, operating in the built environment and associated industries. Its activities include; consultancy, research and innovation, testing, certification, approvals, training, events and accreditation.
On 17 June 2009, BRE published Sprinkler systems explained: A guide to sprinkler installation standards and rules.
Sprinkler systems distribute water to sprinklers which spray water into spaces, providing active fire protection. They are a well-established technology and have demonstrated their reliability and effectiveness in protecting life and property. Traditionally they have mainly been used in commercial and industrial properties, but they are now available for a wide range of applications, including domestic buildings.
They are designed and installed:
- To meet building control or other statutory requirements.
- To meet insurers’ requirements.
- To meet the risk management requirements of a business or property.
Sprinkler systems can be:
- Wet installations.
- Alternate wet and dry installations.
- Dry installations.
- Tail-end alternate systems.
- Pre-action installations.
- Deluge installations.
- System zones.
Sprinklers themselves can be:
- Conventional and spray type sprinklers.
- Ceiling, recessed and concealed type sprinklers.
- Side wall type sprinklers.
- Early Suppression Fast Response (ESFR) sprinklers.
- Enhanced Protection Extended Coverage (EPEC) sprinklers.
The standards for designing and installing sprinkler systems are sometimes seen as excessive and inflexible, but the history of real fire events on which the standards have been based should not be ignored.
BRE's 48 page report provides an aid to understanding fire sprinkler installations and the Loss Prevention Council's (LPCs) Rules to which they are designed. It explains the engineering behind the rules and regulations and some common misunderstandings about sprinkler systems.
The contents of the report include:
- Foreword.
- Introduction.
- How a sprinkler system works and what it is expected to do.
- Why sprinklers are installed.
- Extent of sprinkler protection.
- Hazard classification.
- Special classes of sprinkler system.
- Types of sprinkler system and controls installations.
- Water supplies.
- Sprinkler types.
- Pipework arrangements.
- Interaction with detection and alarm systems.
- Other design standards.
- Installers and installation.
- Service and maintenance.
- Changes of use.
- Approvals.
- References.
- Watermist systems for fire protection in domestic and residential buildings DG 534.
See also: Automatic fire sprinkler systems: A good practice guide.
[edit] Related articles on Designing Buildings Wiki
- Automatic fire sprinkler systems: A good practice guide
- BRE articles on Designing Buildings Wiki.
- Case study A for offices to show where automatic sprinklers have the greatest impact.
- Clean agent.
- Costs of water automatic sprinkler systems.
- Design benefits of automatic sprinkler systems granted under approved document B.
- Embedded security: Procuring an effective facility protective security system.
- Fire detection and alarm systems.
- Fire performance of external thermal insulation for walls of multistorey buildings, third edition (BR 135).
- Fire suppression.
- Leading built environment bodies call for sprinklers in all schools.
- Making the case for sprinklers and dispelling myths.
- Overview of automatic sprinkler system design and operation.
- Sprinkler.
- The cost efficiency of different combinations of fire protection measures.
- The impact of automatic sprinklers on building design.
Featured articles and news
BSRIA Sentinel Clerk of Works Training Case Study
Strengthening expertise to enhance service delivery with integrated cutting-edge industry knowledge.
Impact report from the Supply Chain Sustainability School
Free sustainability skills, training and support delivered to thousands of UK companies to help cut carbon.
The Building Safety Forum at the Installershow 2025
With speakers confirmed for 24 June as part of Building Safety Week.
The UK’s largest air pollution campaign.
Future Homes Standard, now includes solar, but what else?
Will the new standard, due to in the Autumn, go far enough in terms of performance ?
BSRIA Briefing: Cleaner Air, Better tomorrow
A look back at issues relating to inside and outside air quality, discussed during the BSRIA briefing in 2023.
Restoring Abbotsford's hothouse
Bringing the writer Walter Scott's garden to life.
Reflections on the spending review with CIAT.
Retired firefighter cycles world to raise Grenfell funds
Leaving on 14 June 2025 Stephen will raise money for youth and schools through the Grenfell Foundation.
Key points for construction at a glance with industry reactions.
Functionality, visibility and sustainability
The simpler approach to specification.
Architects, architecture, buildings, and inspiration in film
The close ties between makers and the movies, with our long list of suggested viewing.
SELECT three-point plan for action issued to MSPs
Call for Scottish regulation, green skills and recognition of electrotechnical industry as part of a manifesto for Scottish Parliamentary elections.
UCEM becomes the University of the Built Environment
Major milestone in its 106-year history, follows recent merger with London School of Architecture (LSE).
Professional practical experience for Architects in training
The long process to transform the nature of education and professional practical experience in the Architecture profession following recent reports.
A people-first approach to retrofit
Moving away from the destructive paradigm of fabric-first.
New guide for clients launched at Houses of Parliament
'There has never been a more important time for clients to step up and ...ask the right questions'
The impact of recycled slate tiles
Innovation across the decades.
EPC changes for existing buildings
Changes and their context as the new RdSAP methodology comes into use from 15 June.